Integrate with VMC Protocol Apps (VCamNova, VCam2D)
You can move your avatar with motion sent over the VMC Protocol. Use it with apps that can send over the VMC Protocol, such as motion capture apps.
The VMC Protocol can be received in VCamNova and VCam2D. It is not available in VCam.
How to connect
Section titled “How to connect”-
In VCamNova or VCam2D, click the ⚙️ button to open the settings, and turn on “Enable” under VMC Protocol in the “Integration” tab.
-
In the sending app, set the destination IP address and port.
- IP address:
127.0.0.1when sending from an app on the same Mac, or the “IP address of this Mac” shown at the top of the “Integration” tab when sending from another PC or a smartphone - Port: the “Port” shown below “Enable” (
39539by default)
- IP address:
-
Start sending in the sending app. While data is being received, “Connected” appears next to “Enable,” and the avatar moves with it.
What is received
Section titled “What is received”VCamNova receives full-body motion and expressions. Parts the sending app doesn’t send, such as fingers, keep moving with VCamNova’s tracking. Received motion takes priority even while a motion is playing.
While expressions are being received, expressions, blinking, and mouth movement from tracking aren’t used. To keep expressions driven by tracking, turn off “Receive expressions.”
VCam2D receives only the direction of the head and torso. It doesn’t receive arms or expressions, and the mouth and blinking follow tracking.
When the received motion stops, the avatar returns to its tracked motion within a second or two.
If the avatar doesn’t move
Section titled “If the avatar doesn’t move”- Make sure the port in the sending app matches the “Port” in VCamNova or VCam2D.
- When sending from another device, make sure both devices are connected to the same network.
